How to configure local storage sharing on SR20

SR20( V1 )
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
1. Connect Your USB Disk Insert your USB storage device into the router’s USB port directly or using a USB cable.
Tips:
• If you use USB hubs, make sure no more than 4 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been connected.
• If you use a USB hard drive, make sure its file system is FAT32, exFat, NTFS or HFS+.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB Settings > Device Settings and click .
2. Customize USB settings
By default, Share All is enabled, so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below:
1). Visit http://tplinkwifi.net, then log in with your Kasa account.
Note: Web management interface cannot be accessed if the router is not installed successfully via Kasa App.
2). Select Basic > USB Settings. Focus on the Folder Sharing section. Click the button to disable Share All, then click Add to add a new sharing folder.
3). Select the Volume Name and Folder Path, then enter a Folder Name as you like.
4). Decide the way you share the folder:
• Allow Guest Network Access: If you tick this check box, clients on Guest Network will be able to access the shared folders
• Enable Authentication: If you tick this check box, you will be required to use a username and password to access the folder.
• Enable Write Access: If you tick this check box, network clients can modify the folder.
• Enable Media Sharing: If you tick this check box, you can view photos, play music and watch movies in the folder directly from DLNA-supported devices.
5). Click OK.
Tips: The router can share 32 volumes at most. You can click on the page to detach the corresponding volume you do not need to share.
3. To Set up Authentication for Data Security
1). Select Advanced > USB Settings > Sharing Access. Focus on the Sharing Account section.
2). Choose Use Default Account (admin) or Use New Account and click SAVE.
3). Enable Authentication to apply the account you just set.
Note: Due to Windows credential mechanism, you might be unable to access the USB disk after changing Authentication settings. Please log out from Windows and try to access again.
4. To Customize the Address of the USB Disk
1). Select Advanced > USB Settings > Sharing Access. Focus on the Sharing Settings section.
2). Make sure Network Neighborhood is ticked, and enter a Network/Media Server Name as you like, such as My-share, then click SAVE.
3). Now you can access the USB disk by visiting \\My-share (for Windows) or smb:// My-share (for Mac).
5. Access Your USB Disk
For Windows:
Open the Windows Explorer (or go to Computer), type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, enter a username and password if required and then press [Enter].
Note: Here we take Windows 7 as an example.
For Mac:
1) Click Go in the top left corner of the desktop and go to Connect to Server.
2) Type the server address smb://tplinkwifi.net/volume1.
3) Click Connect.
Note: Here we take volume1 (share name of the folder) for example.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.

TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Basic Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Analysis and Marketing Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or