FC111B-20

Omada 10/100 Mbps WDM Media Converter

Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
Adopts WDM technology, transmitting and receiving data on one single fiber
Extends fiber distance up to 20km

What This Product Does

FC111B-20 (TL-FC111B-20) is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.

How This Product Works

FC111B-20 (TL-FC111B-20) adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. FC111B-20 transmits data at 1310nm wavelength and receives data at 1550nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the FC111B-20 should send data at a wavelength of 1550nm and receive data at a wavelength of 1310nm. TP-Link another media converter FC111A-20 is one of the products that can cooperate with FC111B-20.

NETWORK
Standards and Protocols	IEEE802.3, IEEE802.3i, IEEE802.3u

HARDWARE FEATURES
Interface	• 1× 100 Mbps SC/UPC Fiber Port • 1× 10/100 Mbps RJ45 Port (Auto MDI/MDIX)
Network Media	• Single-mode Fiber (9/125μm, maximum 20km) • 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (maximum 100 m)
Power Supply	External Power Adapter: 5 V/0.6 A
LED	PWR, Link/Act
Wave Length	1310 nm TX, 1550 nm RX
Dimensions ( W x D x H )	94.57327 mm

ENVIRONMENT
Operating Temperature	0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature	-40˚C to 70˚C (-40˚F to 158˚F)
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% RH non-condensing

OTHERS
Package Content	• Media Converter FC111B-20 • Power Adapter • Installation Guide

For additional version information, please go to the support page.